How to solve a Megaminx Layer by Layer | Easy to follow Beginners Steps

A Megaminx is a 3D puzzle with 12 sides or faces. Each side is in the shape of a Pentagon (5 sides and corners). In geometry this shape is called a Dodecahedron, but in the magic puzzle industry this is called a Megaminx.

If you already know how to solve a 3x3 then you certainly can make a start on a Megaminx, it just takes longer as there are more pieces to put in place. 

At a beginner level the puzzle is solved layer-by-layer in the following steps:

 


STEP 1 - SOLVE THE FIRST LAYER STAR

 

Solving the fist layer star is the same as solving the first layer cross of a 3x3. 
  1. Keeping the WHITE center on top and the PURPLE center facing you.
  2. Find the WHITE/PURPLE edge piece (it has 2 colours) and turn it so that it is in the same face as the purple center. (keeping white on top and purple in front)
  3. Use the options below as a guide to put the WHITE/PURPLE edge place.
Megaminx step1

Repeat the steps for all the WHITE edges.  This makes the white star making sure all the side colours match.

Result:

Magaminx - step1 white star

 

 

This step is quite intuitive; you can do it for sure but it does take a little practice. Move the white edges to their places not messing up the ones already done.  

 

 


STEP 2 - SOLVE THE FIRST LAYER CORNERS

  1. Keep the WHITE center on top
  2. Put the YELLOW centre in front (facing you)
  3. Find the WHITE/YELLOW/PURPLE corner (it has 3 colours) and place it in one of the positions below (without disturbing the white cross)
  4. Choose from the steps below to place the WHITE/YELLOW/PURPLE corner in place without disturbing the white cross.
Megaminx step2 algs

Possible Problem:
If the corner you are looking for is in the first layer, but in the wrong position or the wrong way around then you can use the same steps above to move the corner out.

Keeping white on top, Follow the above instructions for all the WHITE corners.

Result:

megaminx solution step2 result

 

 

 

 

 


STEP 3 - SOLVE THE SECOND LAYER EDGES

  1. Keep white on top
  2. Find the PURPLE/YELLOW edge piece
  3. Move the edge to the layer below to match the edge with the center colour.
  4. Choose from the steps below to put the edge in place 
Megaminx Step3 Algs

Continue the steps for all the second layer edges only: YELLOW/BLUE, DARK BLUE/RED, RED/DARK GREEN, DARK GREEN/PURPLE.

Possible Problem:

If the edge you are looking for is in the second layer, but in the wrong position or the wrong way around then you can use the same steps above to move the edge out of the second layer. 

 Result:

Megaminx - Step 3 Result

STEP 4 - SOLVE THE THIRD LAYER CORNERS AND EDGES "TEARDROP"

  1. Turn the Megaminx around so that the GREY center is now on top.
  2. Find the PURPLE/ORANGE edge piece
  3. Move the edge in place (between the orange and purple centers) without disturbing the first two layers. This can be done intuitively - no algorithms is necessary. 
  4. Find the PURPLE/ORANGE/YELLOW corner and place it to the bottom right of where it needs to go. 
  5. Use the steps below to put the corner in place.
Megaminx Step4 alg a
  1. Find the YELLOW/ORANGE edge piece
  2. Put the edge in the ORANGE or YELLOW face, matching the center color in the position shown in the image below. 
  3. Use the steps below to put the edge in place.

 Megaminx Step 4 alb b

The next "tear drop" to do is to the right, with the GREY center still on top. Start by putting the LIGHT-GREEN/YELLOW edge in place, followed by the YELLOW/DARK-BLUE/LIGHT-GREEN edge using the same steps as above.

Megaminx - Step4b result

Work your way around the Megaminx, until you have only one set to do.

IMPORTANT:

To complete the last "teardrop" set you will need to rotate the face you are completing one turn to the right so that you don't disturb the completed sets

Follow the steps below to insert the corner.

 Megaminx step4c alg

Follow the steps below to insert the last teardrop edge.

 Megaminx Step4c last teardrop edge

 

This is the most difficult part done and your Megaminx should now look like this:

Result:

 Megaminx Teardrop Result

 


STEP 5 - SOLVE THE FORTH LAYER CORNERS AND EDGES

  1. Turn the Megaminx around so that the GREY center is now on top.
  2. Find a corner in the GREY face that doesn't have GREY.
  3. Turn the top layer only so that the corner is between the matching center colours. In the pic below we use the PURPLE/LIGHT-BLUE/ORANGE corner place it between the ORANGE and LIGHT-BLUE centers.
  4. Use the steps below to put the corner in place.
Megaminx step 5a alg
Repeat this step for all the remaining corners that doesn't have grey
  1. Find an edge in the GREY face that doesn't have GREY.
  2. Turn the top layer only so that the edge matches its center colour.  
  3. Use the steps below to put the edge in place

Megaminx step 5b alg 

Repeat this step for all the remaining edges that doesn't have grey

Result:

Step5 Result

 


STEP 6 - SOLVE THE LAST LAYER STAR

  1. Hold your Megaminx with the GREY center on top.
  2. You should have 1,2 or 3 edges with GREY facing up.
  3. The idea is to first make the GREY star and then swap pieces into their correct position.
  4. Perform the algorithm below until you get the GREY star making sure your Megaminx is orientated is shown in the image.
Megaminx Step6a alg
You will now have 2 or 5 edges pieces in the correct place, meaning they match with the center colors.
If you have 2 edge pieces in the correct position, but they are not adjacent to each other then hold your Megaminx, with one correct edge in the left bottom side. Use the algorithm below to cycle the edge pieces until you have two correct edge pieces adjacent to each other.
If you have 2 edge pieces in the correct position and the are adjacent to each other then hold your Megaminx, with the correct edges in the front and left positions. Use the algorithm below to cycle the edge pieces until all edge pieces in the correct position.
Megaminx Step6b Alg

Result:

 Megaminx step result

 


STEP 7 - SOLVE THE LAST CORNERS

First we will put the corners in the correct position.

You will now have either 2 or ALL the corners pieces will be in their correct positions, either the right way up or reversed. If two corners are in the correct position, then hold the Megaminx so that this correct corners are the front-left and left position as as shown in the image below.

Repeat the sequence of moves until all the corners are in the correct position.

Megaminc step7_alg
The next steps will turn the corners (one by one) the correct way and ultimately solve the cube.

NOTE: THIS ROUTINE MAY APPEAR TO UPSET THE REST OF THE CUBE. DO NOT DESPAIR AND KEEP THE SAME SIDE FACING YOU IT WILL ONLY BE SOLVED ONCE THE LAST CORNER IS ORIENTATED.
Megaminx - step7 alg

Repeat the moves until the GREY side of the corner piece is on top. You may have to do it 2-3 times.


KEEP THE SAME SIDE FACING YOU. Rotate the TOP LAYER ONLY until the next corner piece to be rotated is in the top right position. Repeat the above sequence until the GREY side of the corner that you are rotating is on top. Continue the process until the cube is complete.

Megaminx Print Friendly Guide